Setup Before Using; About Bluetooth; Before Using Hands-Free Function; How To Connect To A Bluetooth Compatible Device (Pairing) - Alpine KCE-400BT Manual De Operación

Setup Before Using

About Bluetooth

Bluetooth is a wireless technology allowing communication
between a mobile device or personal computer over short
distances. This enables a hands-free call or data transmission
between Bluetooth compatible devices. Bluetooth
transmission is available in the unlicensed 2.4 GHz spectrum
if the distance between devices is within 10 meters. For
details, refer to the Bluetooth Homepage
(http://www.bluetooth.com/).
• Depending on the Bluetooth version, a Bluetooth
compatible device may not be able to communicate with
this adapter.
• Proper function of this adapter with all Bluetooth
compatible devices is not guaranteed. For handling of the
BT compatible device, consult your ALPINE dealer or
ALPINE website.
• Depending on the surroundings, Bluetooth wireless
connection may be unstable.
• When you place a call, or perform setup operations, be
sure to stop your car in a safe place.
• For details on the control (selection, enter, cancel) from the
connected unit, refer to the Owner's Manual of the
respective unit.
• Depending on the connected Bluetooth compatible
device(s), the function may differ. Also refer to the Owner's
Manual of the connected device(s).

Before Using Hands-Free Function

Before using the hands-free phone/audio function, the
following settings need to be made.
1
Be sure to set "INT MUTE" (in the setup
function of the connected CD Head Unit or
Digital Media Receiver) to OFF.
• To enable sound pass-through of the Bluetooth compatible
device, make sure that INT MUTE is turned OFF (Initial
setting on the unit is OFF).
2
Set "BLUETOOTH IN" or "BT IN" to
ADAPTER*. (Refer to the Owner's Manual of
the connected units.)
3
Turn the ignition key off (ACC OFF) and on
again (ACC ON).
• Before using a hands-free phone, it must be paired with the
adapter. Refer to "Bluetooth SETUP" (pages 4-5).
* If "BLUETOOTH IN" or "BT IN" setting is turned OFF at
any time, adapter communication is canceled. To resume
communication: repeat Steps 1 through 3 above.
How to connect to a Bluetooth
compatible device (Pairing)
For details on the control from a Bluetooth compatible
device, refer to the Owner's Manual of the Bluetooth
compatible device.
1
Set a Bluetooth connection from a Bluetooth
compatible device.
2
The PIN code ("0000") is displayed on the
connected unit.
• The PIN code is fixed as "0000".
3
Input the PIN code ("0000") in a Bluetooth
compatible device.
4
If the connected unit is successfully
connected to a Bluetooth compatible device,
a paired device name is displayed on the unit,
and then the unit returns to normal mode.
• The registration number 5 is the guest mode. Content that
is registered as the guest mode is deleted when you set
ignition from ACC to OFF. If all the 5 positions (including
guest mode) have been registered, you cannot register the
6th device. To register another device, you need to delete
one of the device from position1 to 5 first.
• If a Bluetooth compatible device is successfully connected,
the next time when the ignition key of the car is turned to
on, the unit will automatically connect to the previously
connected device. However, the connection may fail. If the
auto connection fails, try the connection manually.
• Set "Setting the Search Mode" (page 4) to ON to enable
the KCE-400BT to recognize a mobile phone. For mobile
phone passkey (passcode) input operation, refer to the
mobile's Owner's Manual.
3
-EN