Using Your Steam Mop - Bissell POWERFRESH LIFT-OFF 1544 Serie Guia Del Usuario

Operati s

Using Your Steam Mop

The hard floor cleaner can be used either
on hard floors or above the floor using the
1.
specialized tools. For best results, vacuum
the floor first to clear dust and small debris
before using your steam mop.
Your hard floor cleaner is designed to clean hard
flooring, such as ceramic tile, vinyl, marble, stone
and sealed hard wood floors. Use on waxed or
some unwaxed floors may result in a diminished
glossiness. The hard floor cleaner is not for use
on unsealed wood floors. For best results, test in
an inconspicuous area and check the care
instructions from your flooring manufacturer.
1. Plug the unit in and wait 30 seconds for it to
heat up. When the Steam Ready light illuminates,
press the ON/OFF button to turn the unit ON
then choose the level of steam to clean your
floor:
HI (for durable floors or sticky messes) or
LO (for delicate floors or every day cleaning).
2. Once the level is selected the steam will start.
3. Begin cleaning by slowly moving the unit over
the floor surface. Moisture on the floor is normal
when cleaning.
4. When the hard floor cleaner stops emitting
steam and you hear a "knocking" sound, turn
the unit off and unplug. Then open the easy fill
opening on the water tank and use the water
cup to add water to the tank after lying the unit
down per another side.
NOTE: To be sure to sanitize an area of your
floor, use the microfiber cloth pads and slowly
and evenly stroke your steam mop back and
forth at least three times over the area using
continuous steam. For best results, remove the
pad and wash after use.
www.BISSELL.com
7