Vimar ELVOX 7211 Instrucciones Instalador página 7

7200
DESCRIPTION
Type 7211 is a 7200 series open-voice monitor with 7" TFT LCD screen
(thin film transistor for active matrix display) with 16:9 widescreen aspect
ratio, for ELVOX TWO-WIRE video interphone installations. It is equip-
ped with a backlit keypad consisting of 8 push-buttons, 4 for conventional
functions: door lock release, monitor self-start, conversation, stair light ser-
vice, and 4 push-buttons for activation of additional auxiliary functions or
intercom calls. These latter push-buttons are also used for the following
settings: brightness and contrast control, ringtone volume control and mute,
selection of different ringtones, conversation volume control, selection of
communication mode and activation of automatic answer function. The de-
vice also has two LEDs (red and green) for indicating ringtone mute, door/
gate open and setting mode.
The monitor is equipped with a removable cover and is available in a range
of alternative colours. Installation of monitor type 7211 requires the use of
back box type 7249.
The back box is made of ABS plastic and is equipped with a cover to pre-
vent the ingress of mortar and grout during masonry work. Its dimensions
are 189x160x52 mm.
Caution: In the case of systems with separate cameras, we recommend
using cameras with a minimum resolution of 420 TV lines.
Monitor technical specifications
- ABS video interphone
- Removable terminal block
- 7" TFT LCD monitor, 16:9 widescreen aspect ratio
- Standard PAL video signal
- Operating temperature from 0° to +40° C
- Electronic ringtone
- Input for landing calls with different ringtone from entrance panel calls.
- Output for additional ringtone type 860A.
- Supply of data from bus.
- Input for additional power supply (type 6923) if the user wishes simulta-
neous activation of more than two monitors.
- Option of selecting hands-free communication mode (e.g. no need to
keep the talk/listen button pressed) or push-to-talk mode
- Dimensions: 193x159x18 mm + 31 mm (for flush-mounting)
Fig. 1A
A
B
D E
L
EN
C F G H
M
Front panel commands and controls
A) 7" TFT LCD colour screen, 16:9 aspect ratio
B) Microphone
C) Loudspeaker
D) Pair of push-buttons "
liary functions or intercom calls and for contrast control (when display is
switched on), conversation volume and ringtone volume (when display is
switched off).
E) Pair of push-buttons "
xiliary functions or intercom calls and for brightness control (when display
is switched on) and melody selection (when display is switched off).
F) Push-button
unit camera or a standalone camera (programmed on the entrance
panel) and/or to enter setting mode.
G) Push-button
69RH (e.g. stair lights).
H) Push-button
I) Talk/listen push-button: to communicate with the speech unit
on receiving a call or after self-start or to communicate with intercom
devices. The default conversation mode is "HANDS FREE". Alternatively
the unit can be set to push-to-talk mode (see paragraph "Communication
mode selection function").
L) Ringtone mute indicator: if the red LED lights up, this indicates
that the call tone is off. The red LED also remains on throughout the
conversation, e.g. as long as the audio connection is active.
M) Door open indicator: if the green LED lights up, this indicates that
the door is open (this function is optional depending on the type of instal-
lation). If the green LED is flashing, this also indicates setting mode,
enabling the brightness, contract, volume or melody to be adjusted using
the arrow buttons "
Connection terminal block and settings on back of monitor
Fig. 1B
Colour adjustment
trimmer
Connection terminal block
+12, CH) Additional ringtone connection.
1, 2) BUS line.
E+, E- ) Additional supply voltage for video-interphone with power
I
supply type 6923.
FP, M) Connection for landing call push-button.
" and " ": for activation of auxi-
" and " ": for activation of au-
: for monitor self-start on activation of the speech
: for auxiliary service, 1st relay of 1st actuator type
: for door lock release.
, , " and "
A-B-C connectors
for stabilisation of the video signal
Removable connection terminal block
RESET push-button
".
7