Safety Instructions - Hammerhead HLLT10 Manual Del Usuario



SAFETY INSTRUCTIONS

Safety Instructions for Digital Laser Level
WARNING
LASER RADIATION. Do not stare into
beam. ClassII laser product. Turn the
laser beam on only when using this
tool.
• Do not remove or deface any
product labels.
• Avoid direct eye exposure. The laser
beam can cause flash blindness.
• Do not operate the tool around chil-
dren or allow children to operate the
tool.
• Do not place the tool in a position that
may cause anyone to stare at the laser beam, whether intentionally or unintentionally.
• Do not use on surfaces, such as sheet steel, that have shiny, reflective surfaces. The shiny
surface could reflect the beam back at the operator.
• Always turn the laser tool off when not in use. Leaving the tool on increases the risk of
someone inadvertently staring into the laser beam.
• Do not attempt to modify the performance of this laser device in any way. This may result in
a dangerous exposure to laser radiation.
• Do not attempt to repair or disassemble the digital laser level. If unqualified persons attempt
to repair this product, serious injury may occur. Any repair required on this laser product
should be performed only by qualified service personnel.
• Use of other accessories that have been designed for use with other laser tools could result in
serious injury.
• Do not place or store tool under extreme temperature conditions.
IMPORTANT SAFETY INSTRUCTIONS – SAVE THESE INSTRUCTIONS
DANGER
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, CAREFULLY FOLLOW THESE
INSTRUCTIONS
10" / 24" / 48" DIGITAL LASER LEVEL
CAUTION
PRECAUCIÓN
CAUTION
PRECAUCIÓN
LASER RADIATION - DO NOT STARE INTO BEAM
RADIACIÓN LÁSER: NO MIRE DIRECTAMENTE EL RAYO
650nm, Output < 1mW, Class II laser product
Complies with 21 CFR parts 1040.10 and 1040.11
Producto láser clase II con salida < 1mW, 650 nm, que
cumple con las secciones 21 CFR 1040.10 y 1040.11
Model / Modelo : HLLT24
24" Digital Laser Level /Nivel láser digital 24"
3V 2×1.5 V AAA Battery
MADE IN CHINA
3V Batería AAA 2×1,5 V
HECHO EN CHINA
CAUTION
PRECAUCIÓN
CAUTION
PRECAUCIÓN
LASER RADIATION - DO NOT STARE INTO BEAM
RADIACIÓN LÁSER: NO MIRE DIRECTAMENTE EL RAYO
650nm, Output < 1mW, Class II laser product
Complies with 21 CFR parts 1040.10 and 1040.11
Producto láser clase II con salida < 1mW, 650 nm, que
cumple con las secciones 21 CFR 1040.10 y 1040.11
Model / Modelo : HLLT48
48" Digital Laser Level /Nivel láser digital 48"
3V 2×1.5 V AAA Battery
MADE IN CHINA
3V Batería AAA 2×1,5 V
HECHO EN CHINA
3