Descargar Imprimir esta página

Technical Specifications - Philips Avent SCF870 Manual Del Usuario

Ocultar thumbs Ver también para Avent SCF870:

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 30
Problem
A smell of grilled
or burnt food
comes out of the
water tank
There are dark
spots in the baby
food or the water
in the jar has an
unusual colour.

Technical specifications

-
Voltage/wattage: see type plate on the bottom of the appliance.
-
Maximum capacity of water tank: 200ml.
-
Maximum capacity of jar, solid ingredients: 800ml.
-
Maximum capacity of jar, liquids: 450ml.
-
Usage temperature: 10°C to 40°C
-
Protection: temperature-controlled heating system and safety lock.
4203.000.6226.2.indd 17
Possible cause
Solution
Food particles have
Clean the water tank according to the instructions
entered the water
in chapter 'Cleaning and maintenance, section
tank during use and
'Descaling the water tank'. Use the appliance strictly
have caked onto the
according to the instructions. Make sure you do not
heating element.
overfill the water tank with water (max 200ml) and
that you do not overfill the jar with food (do not fill
the jar beyond the top edge of the green blade
unit). Do not steam the same ingredients for more
than 20 minutes and do not put water for steaming
directly in the jar. Also make sure that the valve is
fixed in the lid.
Food particles have
Clean the water tank according to the instructions
entered the water
in chapter 'Cleaning and maintenance, section
tank during use and
'Descaling the water tank'. Use the appliance strictly
have caked onto the
according to the instructions. Make sure you do not
heating element. This
overfill the water tank with water (max 200ml) and
causes residues of
that you do not overfill the jar with food (do not fill
these food particles to
the jar beyond the top edge of the green blade
enter the jar during
unit). Do not steam the same ingredients for more
steaming.
than 20 minutes and do not put water for steaming
directly in the jar. Also make sure that the valve is
fixed in the lid.
EngliSh
17
05-11-10 13:21

Publicidad

loading