Rechargeable Battery - Medela Clario Instrucciones De Uso

AC/DC versions
Vll
Indicators
does not light up Rechargeable battery is fully charged / empty
during battery
operation
blinks slowly
lights up
During
mains ope-
does not light up Rechargeable battery is fully charged
ration
E P !
blinks rapidly
B E
E P !
B E
E P !
B E
Performance of rechargeable battery
Duration of pumping
at max. vacuum
at min./med. vacuum
Charging time (charged up to 100%)

Rechargeable battery

1. Disconnect the mains cable
2. Select maximum vacuum
3. Switch on the Clario
4. Measure the running time
5. Compare the running time
ok?
OK, if the above value is reached
not OK
• Calibrating the rechargeable battery
• Repeat this process
NiMH rechargeable battery
Before first use
after storage
duration > 2 months
Operation with
rechargeable battery
Storage
LED display
visual
Rechargeable battery soon empty (~10 mins. pumping duration)
Rechargeable battery is being charged
E P !
Rechargeable battery is defective. Replace with a new one.
B E
E P !
B E
E P !
B E
Calibrating the rechargeable battery
A Completely discharge the rechargeable battery
• Disconnect the mains cable
• Switch on the Clario and allow to run until
it comes to a standstill
B Charge the Clario
• Plug in the mains cable – the rechargeable
battery is being charged
• Wait until the charging indicator goes out
☛ Only charge the rechargeable battery when the charging indicator
blinks slowly
In order to keep the self-discharge at a minimum, store the Clario
and the replacement rechargeable batteries at temperatures below
25°C (77°F). When storing the Clario over a longer period of time,
we recommend to store device and battery separately.
> 50 mins.
< 50 mins.
~ 5 hrs.
> 50 mins.
If the calibration
was not successful,
replace battery
Repeat this
process
once
The Clario is
then ready
for use
EN 5