First Aid Measures - Alder USV-6-80T Manual De Servicio

Controlador de válvulas de cuerpo recto hydro pro universal
Tabla de contenido

Publicidad

(MSDS: 722330)
Pre-Existing Medical Conditions:
disorders.

4. FIRST AID MEASURES

Eye: If irritation or redness develops, move victim away from exposure and into fresh air. Flush eyes
with clean water. If symptoms persist, seek medical attention.
Skin: Wipe material from skin and remove contaminated shoes and clothing. Cleanse affected area(s)
thoroughly by washing with mild soap and water and, if necessary, a waterless skin cleanser. If
irritation or redness develops and persists, seek medical attention.
Inhalation (Breathing): If respiratory symptoms develop, move victim away from source of exposure and into
fresh air. If symptoms persist, seek medical attention. If victim is not breathing, clear airway and immediately
begin artificial respiration. If breathing difficulties develop, oxygen should be administered by qualified
personnel. Seek immediate medical attention.
Ingestion (Swallowing): First aid is not normally required; however, if swallowed and symptoms develop, seek
medical attention.
Note To Physicians: High-pressure hydrocarbon injection injuries may produce substantial
necrosis of underlying tissue despite an innocuous appearing external wound. Often these injuries
require extensive emergency surgical debridement and all injuries should be evaluated by a
specialist in order to assess the extent of injury.
5. FIRE FIGHTING MEASURES
Flammable Properties:
Unusual Fire & Explosion Hazards:
cooled, it can rupture in the heat of a fire.
Extinguishing Media: Dry chemical, carbon dioxide, foam, or water spray is recommended. Water or foam may
cause frothing of materials heated above 212°F. Carbon dioxide can displace oxygen. Use caution when applying
carbon dioxide in confined spaces.
Fire Fighting Instructions: For fires beyond the incipient stage, emergency responders in the immediate hazard
area should wear bunker gear. When the potential chemical hazard is unknown, in enclosed or confined spaces, or
when explicitly required by DOT, a self contained breathing apparatus should be worn. In addition, wear other
appropriate protective equipment as conditions warrant (see Section 8).
Isolate immediate hazard area, keep unauthorized personnel out. Stop spill/release if it can be done with minimal
risk. Move undamaged containers from immediate hazard area if it can be done with minimal risk.
Water spray may be useful in minimizing or dispersing vapors and to protect personnel. Cool equipment exposed to
fire with water, if it can be done with minimal risk. Avoid spreading burning liquid with water used for cooling
purposes.
6. ACCIDENTAL RELEASE MEASURES
This material may burn, but will not ignite readily. Keep all sources of ignition away from spill/release. Stay
upwind and away from spill/release. Notify persons down wind of the spill/release, isolate immediate hazard area
and keep unauthorized personnel out. Stop spill/release if it can be done with minimal risk. Wear appropriate
protective equipment including respiratory protection as conditions warrant (see Section 8).
Página 58
Conditions aggravated by exposure may include skin
Flash Point: >384°F/>196°C (COC)
OSHA Flammability Class:
LEL/UEL%: No Data
Autoignition Temperature: No Data
This material may burn, but will not ignite readily. If container is not properly
Not applicable
Manual de servicio USV-6-80T
Page
3 of 7

Publicidad

Tabla de contenido
loading

Productos relacionados para Alder USV-6-80T

Tabla de contenido