Mounting Bracket Safety; Installation Instructions; Tools And Parts; Bracket Use Requirements - Whirlpool Gladiator Instrucciones De Instalación

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety
messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word "DANGER" or "WARNING."
These words mean:
DANGER
WARNING
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.

Tools and Parts

Gather the required tools and parts before starting installation.
Tools Needed:
¹⁄₂" Wrench
Parts Supplied:
Mounting bracket sections (6)
⁵⁄₁₆" Flange nut (9)

Bracket Use Requirements

Intended for use with Gladiator
Large GearBox cabinets only. Please use the instructions
specific to your cabinet.
Intended to be used for mounting cabinets on Gladiator
GearWall ® panels or GearTrack
Brackets will support a cabinet with a maximum weight limit of
250 lbs (113.6 kg).
2

MOUNTING BRACKET SAFETY

Your safety and the safety of others are very important.

INSTALLATION INSTRUCTIONS

Carriage-head bolt (9)
Washer (9)
® Steel Large GearBox or Extra
® channels.
You can be killed or seriously injured if you don't immediately
follow instructions.
You can be killed or seriously injured if you don't follow
instructions.
1. Verify contents. See "Parts Supplied."
2. Dispose of/recycle all packaging materials.
Slide the end of one bracket section into the end of another section
until the center holes are aligned.
®

Unpack Brackets

Assemble Brackets