IOGear GUCE64 Guia De Confirguarcion Rapide página 4

2. Connect the GUCE64 BoostLinq Ethernet Remote Unit to a power source, using
the included power adapter. Power LED on Remote Unit should show red.
3. Connect the GUCE64 BoostLinq Ethernet Local
Unit with the Remote Unit, using a Cat5, Cat5e,
or Cat6 cable (not included). Link LED on both
Local and Remote Unit should show orange.
4. Plug up to four USB devices to the GUCE64
BoostLinq Ethernet Remote Unit. Device LED on
both Local and Remote Unit should show green.
5. The GUCE64 is plug-n-play, no additional driver or
software needed.
Power
Device
Link
Remote Unit
3.
Power
Device
Link
Local Unit
4.
Power
Device
Link
Remote Unit
HDD
3