Before The First Use - Tristar AC-5420 Manual De Usuario

Instruction manual

BEFORE THE FIRST USE

• Take the appliance and accessories out the box. Remove the stickers,
protective foil or plastic from the device.
• Before using your appliance for the first time, wipe off all removable
parts with a damp cloth. Never use abrasive products.
• Place the device on a flat stable surface and ensure a minimum of
20 cm. free space around the device. This device is not suitable for
installation in a cabinet or for outside use.
• Put the power cable into the socket. (Note: Make sure the voltage
which is indicated on the device matches the local voltage before
connecting the device. Voltage 220V-240V 50/60Hz)
OPERATION
Display
• When the unit is plugged in, it will indicate the room humidity level.
• When you set the humidity, it will indicate the humidity that you have
selected.
• When you program the time for the unit to turn on and off, it will show
the hours.
• When the environment humidity is lower than 35%, it will show "LO"
• When the environment humidity is higher than 95%, it will show "HI"
4
Operating instructions
• Press the Power button once to start operation. Press it again to stop
operation.
• Press the up or down button to set the desired humidity level in the
room, which can be set from 30% to 90% at 5% intervals. After a period
of working, when the environment humidity is lower than the selected
humidity by 2%, the compressor will stop and fan stops working 3
minutes later; When the environment humidity is equal to or higher
than the selected humidity by 3%, the compressor will restart once the
3-minute compressor protection time is over.
• Press the timer button to program the time when the unit turns on and
turns off. If you want to cancel the timer programming, press the timer
button to adjust the time at 00, and press the timer button, it will be
circulate from 00-01-02......23-24. It is the programmed time to switch
the machine. The programmed time will be cancelled if you switch the
compressor. The programmed time remains unchanged if the machine
stops to work due to water full or during defrosting
• Press the laundry button to open and close Laundry function.
Draining the collected water
When the drainage tank is full, the tank full indicator light will turn on,
the operation will stop automatically and the buzzer will beep 15 times to
alert the user, that the water need to be emptied from the drainage tank.