Power Switch - Fender PASSPORT EXECUTIVE PR 692 Instrucciones De Funcionamiento

Set-Up
1. Open the front cover of the Wireless
Transmitter and insert 2 new AA
batteries as shown, then switch on the
Wireless Transmitter.
2. Switch on the Passport Executive, then
press and hold the Channel
Scan button for 2 seconds to
Channel
Scan
automatically select the best
receiver channel.
3. Use the buttons to change the
channel on the Wireless Transmitter to
match the receiver channel displayed
on the Passport Executive. Then press
the SET button to confirm.
4. Plug the Headset into the
Wireless Transmitter.
5. Put on the Headset, then attach
the Wireless Transmitter to your
waist. Adjust the Master Volume
and Wireless Mic Volume levels
on the Passport Executive.
• NOTE: For optimal results, place the Passport
Executive on an elevated surface such as a
table, and keep a clear line-of-sight between the
Wireless Transmitter and the Passport Executive
base unit.
Specifications Specifications
TYPE:
PR 692
PART NUMBERS:
069-4000-000 (120V~, 60Hz),
069-4000-930 (240V~, 50Hz) AUS DS,
069-4000-950 (220V~, 50Hz) ARG DS,
069-4000-970 (100V~, 50/60Hz) JPN DS, 069-4000-990 (220V~, 60Hz) ROK DS
POWER REQUIREMENT:
230W
DIMENSIONS:
Height: 11.5 in (29.2cm)
Depth: 4.5 in (11.4 cm)
WEIGHT:
7.6 lb (3.5 kg)
Product specifications are subject to change without notice.
6 6
Passport Executive Passport Executive
CH 001
SET
2. 1.
069-4000-910 (110V~, 60Hz) TW DS,
069-4000-040 (230V~, 50Hz) UK,
069-4000-060 (230V~, 50Hz) EUR,
Width: 15.5 in (39.4 cm)
fender.com fender.com
Passport Executive (base)
MASTER VOLUME—Adjusts the overall loudness.
MASTER TONE—Rotate clockwise to boost high
frequencies and reduce lows. Rotate counter-clockwise
to reduce highs and boost lows.
WIRELESS / WIRED MIC VOLUME—Use to adjust the
volume levels of the Wireless and Wired Mics, then set
the Master Volume to the desired level.
CHANNEL—Displays the wireless receiver channel.
CHANNEL SCAN—Press and hold for 2 seconds to scan
automatically to the clearest receiver channel. Press
repeatedly to manually step through the channels, then
press and hold to confirm your selection.
WIRELESS ACTIVE—Indicates a successful link with the
Wireless Transmitter when illuminated.
BASS BOOST—Adds a low-frequency boost.
POWER—Indicates the system is ON when illuminated.
LINE IN / LINE OUT—Plug your mp3 / CD player into
Line In for accompaniment. Use the volume control on
your mp3 / CD player together with Master Volume
to adjust the loudness. You can connect the Passport
Executive to recording equipment using Line Out.
MIC IN—Plug a wired microphone into either jack.
POWER SOCKET—Plug into a grounded A/C outlet
in accordance with the voltage and
frequency ratings specified on the rear
panel of your Passport Executive.
POWER SWITCH—Turns the Passport
Executive ON-OFF.
0 Ð