Panblast BAC-AF-PB-0032 Manual De Funcionamiento Del Producto página 2

1.0 GENERAL INFORMATION
1.1 All products and equipment designed and manufactured by Pan Abrasives
are intended for use by experienced users of abrasive blasting equipment,
and its' associated operations and abrasive blasting media.
1.2 It is the responsibility of the user to:
1.2.1 Determine if the equipment and abrasive media is suitable for the
user's intended use and application.
1.2.2 Familiarize themselves with any appropriate laws, regulations and
safe working practices, which may apply within the user's working
environment.
1.2.3 Provide
environment, including operator protective equipment such as, but
not limited to, safety footwear, protective eyewear and hearing
protection.
1.3 Pan Abrasives Standard Terms and Conditions of Sale apply. Contact your
local Pan Abrasives office or distributor should you require any further
information or assistance.
2.0 INSTALLATION
! WARNING !
CONJUNCTION WITH THE SUPPLIED AIR RESPIRATOR HELMET MANUAL.
2.1 The purpose of the Air Cooling Controller is to allow the blasting operator
to adjust the temperature of the incoming air to the Supplied Air Respirator
Helmet, to suit personal preference.
2.2 Check that the rubber washer is in place in the Supplied Air Respirator
Helmet Breathing Tube. Then attach the Air Cooling Controller screwed
fitting to the Breathing Tube and firmly hand tighten.
appropriate operator
– THESE INSTRUCTIONS
BREATHING TUBE ASSEMBLY
BREATHING TUBE FITTING
- 1 -
training and a safe
SHOULD BE
SEALING WASHER
working
READ IN