Panasonic Nanoe EH‑NA65 Instrucciones De Operación página 11

Maintainingthenanoe™outlet
• Use commercially available cotton swabs. (We recommend
the thin cotton swabs made for use with babies.)
• This maintenance allows the hair dryer to sustain the
generated level of nanoe™ over a long period.
1. Dampen the end of the
cotton swab with tap water.
2. A needle portion is located
deep within the nanoe™
outlet. Using the swab, rub
this portion gently about 5
times.
Maintainingthefilter
• At least once a month, when dust etc. has built up, detach
the filter from the hair dryer and remove the dust etc. using a
toothbrush or vacuum cleaner.
• Use a commercially available toothbrush.
1. Pull on the catch on the
bottom side of the filter to
detach.
Gently rub the tip of
the needle portion
cotton
swab
nanoe™ outlet
Filter
2. Remove any dust etc. adhered to the filter or air inlet.
• Remove the dust etc. adhered to the outside of the filter
using a vacuum cleaner. If this does not remove the dust,
use the thick part of your fingers to push the dust etc.
through the fine mesh on the internal side towards the
metal mesh on the external side, and scrub away carefully
with a toothbrush.
• Using the toothbrush, carefully scrub away any dust etc.
from the internal side of the filter.
• Using a vacuum cleaner or toothbrush, carefully remove
any dust etc. adhered to the air inlet.
• Rubbing forcefully with your nails may tear the filter, so
please use a toothbrush.
3. Attach the filter securely,
starting with the upper side.
• Keep pressing until you
hear a "click" from both
upper and lower catches.
11