Rs485 Modbus Rtu Connection - DAB ESY I/O Instrucciones De Instalación Y Mantenimiento

ENGLISH
Figure 8: Connection of the pressure sensor
The mode of use will depend on the settings made on the device/group of devices (see associated product manual).
Via the Dconnect APP, it is possible to select the sensor used.
Figure 9: Pressure Sensor Setting Page
The following sensors are currently supported:
1) HUBA pressure sensor 0-25 bar

2.10 RS485 Modbus RTU connection

Esy I/O can be used as an RS485 gateway, with MODBUS RTU protocol, in order to perform data monitoring and control on devices supported
by Esy I/O.
21