Parts Description; Before Use - Tristar TR-2552 Manual De Usuario

EN INstruc tIoN maNual
(*) Competent qualified electrician: after sales department of the producer or
importer or any person who is qualified, approved and competent to perform
this kind of repairs in order to avoid all danger. In any case you should return
the appliance to this electrician.

PartS deScriPtion

1. Cuttinw element
2. Thinninw wuide
3. Settinw selector
4. On/off slide
5. Charwinw liwht
6. Dockinw station
7. Comb (0.5mm-2.5mm)
8. Comb (3mm-18mm)
9. Comb (21mm-36mm)
10. Cleaninw brush
11. Lubricatinw oil

Before uSe

charge
Charwe the appliance for at least 16 hours before you use it for the first
time and after a lonw period of disuse. When the appliance is fully charwed,
it has a cordless operatinw time of up to 45 minutes. Do not charwe the
appliance for more than 24 hours.
1. Make sure the appliance is switched off.
4
7
8
9
10
11
2. Insert the small pluw into the socket of the appliance and put the
adapter in the wall socket.
3. After a few seconds, the charwinw liwht woes on to indicate that the
appliance is charwinw.
note:
The charwinw liwht does not chanwe colour and does not wo out
when the appliance is fully charwed.
1
uSe
2
PrePare Before cut ting
1. Only use the appliance on clean and dry hair. Do not use it on just
washed/wet hair.
3
2. Make sure that the head of the person whose hair you intend to cut is
4
at the same level as your chest. This ensures that all parts of the head
are clearly visible and within easy reach.
3. Comb the hair in the wrowth direction.
5
cliPPing with comB
6
1. The appliance comes with three combs for different hair lenwths.
The minimum remaininw hair lenwth is 0.5 mm and the maximum
remaininw hair lenwth is 36 mm.
2. Put the chosen comb into the appropriate slots on either side of the
appliance, then click the mountinw tab on the appliance.
3. To set the comb to the desired settinw, turn the settinw selector and
the comb will slide to the desired hair lenwth settinw. The settinw
indications on the appliance shows the selected settinw.
4. Turn on the appliance.
5. Move the appliance throuwh the hair slowly. To clip in the most
effective way, move the appliance awainst the direction of hair wrowth.