Fuse Replacement; Maintenance Instructions; Moving And Storage Instructions - MAC TOOLS MTPROA Manual De Operación Y Mantenimiento

FUSE REPLACEMENT

The jump starter is equipped with a replaceable fuse, to protect the battery from overload.
Fuse Specification
•
Littelfuse BF2 series type, rated 32 V, 300 A.
WARNING! KEEP AWAY FROM SPARKS AND FLAME – BATTERY COULD EMIT EXPLOSIVE GASES.
1. Allow the fuse to cool down completely (approximately 5 minutes).
2. Make sure the the unit is unplugged from any power source.
3. Remove the negative (BLACK) clamp and cable from the cord/clamp holder on the side of the unit and locate the fuse cover.
4. Follow the arrow to open the right side of the fuse cover, and then rotate the cover from right to left to remove it.
5. Using a 13mm socket/wrench, remove both nuts and washers.
6. Remove the open fuse and replace it with a new one of the same type and rating.
7. Replace and torque the top nut/washer to 50 in-lbs. to secure the fuse.
8. Replace the fuse cover.
9. The unit is now ready to use.

MAINTENANCE INSTRUCTIONS

After use and before performing maintenance, unplug and disconnect the jump starter.
•
Use a dry cloth to wipe all battery corrosion and other dirt or oil from the battery clamps, cords, and the jump starter's case.
•
Ensure that all of the jump starter's components are in place and in good working condition.
•
Servicing does not require opening the unit, as there are no user-serviceable parts (except the fuse). All servicing should be
•
performed by qualified service personnel.

MOVING AND STORAGE INSTRUCTIONS

WARNING! THE CLAMPS ARE LIVE AND WILL PRODUCE ARCING OR SPARKING IF THEY
COME IN CONTACT WITH EACH OTHER.
Do not store the clamps clamped together, on or around metal, or clamped to cables. Keep the clamps on the storage holders
•
when not in use.
• Store the jump starter in an upright position.
Store inside, in a cool, dry place.
•
If the jump starter is moved around the shop or transported to another location, take care to avoid/prevent damage to the cords,
•
clamps and jump starter. Failure to do so could result in personal injury or property damage.
800.MACTOOLS
7