hjh OFFICE SAFE COMPACT III Manual Del Usuario página 10

CLOSING DOOR
• Turn the knob (master key) counter clockwise to close the door.
AUTOMATIC LOCK
• 3 continuously wrong entries will activate the warning beeps.
CAUTION: The keypad would be disabled during the beeping. You can only stop the beeps by
opening the safe with emergency key and power-cut by removing the battery.
SETTING THE USER CODE
• Open the safe, press the reset button, start setting code when the yellow light goes on.
• Input new code (3-8 digits), and press the „A" (C/#) or „B" (E/*) button to confirm with beeps,
which indicates the acceptance and storage of the new code.
• If the yellow light flashes with beeps, the code changing is not effective, and you need to try
again.
OPENING THE SAFE WITH THE EMERGENCY KEY
Upon first receipt of the safe, or either the electronic circuit malfunction or codes unknown. You
could also use the emergency key to open the safe.
• Remove emergency lock cover.
• Insert the emergency key, and turn it counterclockwise, then turn the knob (master key) clock-
wise to open the door.
CAUTION: Finish operation, pull out the emergency key and keep it in a safe place.
EN
4