Mode
Function
Setting meas-
F - 3
urement unit
F - 4
F - 5
Laser setting
Save Save and automatic shut off
Body Temperature Measurements
that taking vasoconstrictive medication and skin irritations can distort the result when
measuring temperature on the forehead.
• Press the trigger to switch the thermometer on with one beeper. The device per-
forms a brief self test: all elements of the display are shown for approx. 1 second.
Following a successful self test with backlit (Red - Orange - Green).
• Press the " B / O " button for "Body temp" for accurate measurements in the range
• Hold the device by its handle and point it toward the spot to be measured. Meas-
urement distance should be < 2.5 cm (< 1 in).
• Press the trigger to take a temperature reading. The temperature reading appears
in the display.
Temperature (°C) Temperature (°F) Fever Teller
T < 32.0
T > 42.9
Notice: Red Backlit is followed alarm temperature limit (fever alarm).
• Release the trigger and the reading will hold for approximately 15 seconds after
which the thermometer will automatically shut off.
Note: Before shutting off, you can take further measurement.
68
PC-FT3094 IM 90x126mm
" "
" "
On
Off
On
Off
T < 89.6
Green
Green
Orange
Red
T > 109.2
Default
Remark
On
Only when the laser
Off
head installed
" button the sound is set
Beep
Three beeps
One beep
One beep
Ten rapid beeps
Three beeps
12.01.21