Cleaning And Storage; Technical Specifications - Dörr LV-30 Manual De Instrucciones

06 | OPERATION
06.1 With smartphone/tablet
1. Slide the On/Off switch (05) to position "Off/Smartphone".
2. Insert the 3,5 mm TRRS mini jack plug (06) into the headphone socket of your smartphone.
3. Start the video recording or voice recording on your smartphone and speak into the microphone (01).
NOTE: To hear the sound while playing the video or audio recording, please unplug the cable from your
smartphone/tablet.
06.2 With DSLR, system and compact cameras, camcorders etc.
1. Slide the On/Off switch (05) to position "Camera".
2. Insert the 3,5 mm TRRS mini jack plug (06) into the microphone socket of your recording device. If necessary, use the supplied
adapter plug 6,3 mm to connect the microphone with the recording device.
3. Start the video recording and speak into the microphone (01).

07 | CLEANING AND STORAGE

Never use aggressive cleansing agents or benzine to clean the device. We recommend a soft, slightly damp microfiber cloth to clean
the outer parts of the device. Remove batteries before cleaning! Store the device in a dust-free, dry and cool place. This device is not
a toy - keep it out of reach of children. Keep away from pets.

08 | TECHNICAL SPECIFICATIONS

08.1 Specifications
Type
Polar pattern
Frequency response
Sensitivity
Equivalent noise
Maximum Sound Pressure Level (Max SPL)
Signal-To-Noise ratio
Output impedance
Connection
Cable length approx.
Power supply
Dimensions power module approx.
Weight approx.
10
Electret condenser microphone (mono)
omnidirectional
50 Hz - 15 kHz
-38 dB ± 3 dB (0 dB = 1 V/Pa @ 1 kHz)
25 dB-A
120 dB
> 76 dB
1000 Ω
3,5 mm TRRS mini jack plug, with adapter 6,3 mm
8 m
1x LR44 button cell (included)
5,1 cm x ø 1,8 cm
89 g
doerr-foto.de