Use Instructions; How To Operate - Beper BP.001 Manual De Instrucciones

EN
Juice Extractor Use instructions
DESCRIPTION OF THE COMPONENTS Fig.A
1. Presser
2. Lid
3. Centrifugal filter
4. Filter base
5. Locking clip
6. Removable pulp container
7. Motor base
8. ON/OFF knob
9. Non-slip feet
10. Power cord
11. Plastic beaker

USE INSTRUCTIONS:

After you have removed the appliance from the wrapping you have to wash all the components,
except for the motor base, in warm soaping water.
ASSEMBLYING:
Place the motor unit on a flat, dry surface.
Place the container and the beaker on the motor body, insert the filter base and the centrifugal filter by applying
a little pressure.
Place the lid by inserting the groove in it into the slot placed on the filter base.
Lift the locking clip to insert it into the slots of the cover until you hear a click.
The centrifuge is equipped with a safety lock; to make it work the lid must be well closed with the locking clip.
Proceeding with the reverse operations, the various components of the centrifuge will be removed; operation
necessary to proceed with cleaning.

HOW TO OPERATE:

Wash well and cut the fruit and vegetables that you want to centrifuge into small pieces.
Fruit with a thick peel must be peeled. Remove the hard parts like kernels and seeds from fruits (as from pea-
ches, apricots, cherries, plums, melons, etc.).
IMPORTANT: The juice obtained must be consumed within 24 hours.
Connect the power cord to the electrical outlet. Making sure that the on/off knob is set to 0.
Place the on/off knob on I, insert the pieces of fruit or vegetables into the mouth of the lid and press lightly with
the presser.
!CAUTION! Do not use your fingers to press the fruit.
During the centrifuge of the fruit and vegetable it is possible to position the on/off knob on the position II for
greater speed.
Do not run the appliance for more than 1 minute. Allow the engine to stand for at least 2 minutes before restarting.
At the end, turn off the appliance by setting the on/off knob to 0.
Unplug the power cord from the electrical outlet.
Pour the juice into a glass to be served.
CLEANING AND MAINTANANCE:
Ensure that the appliance is unplugged.
We recommend cleaning immediately after use, better before food residues get dry.
Clean the motor body with a damp cloth. Do not immerse in water. Do not spray cleaning liquids directly on the
motor body.
Clean the presser, the lid, the filter base and the container with warm water and dish detergent.
Wash the centrifugal filter with water, you can also use a Non-Metallic brush ; pay lots of attention as the blades
are sharp.
9