Tabla de contenido
Publicidad
VaCuuM DesCrIPTIOn
1. Handle
2. Dirt Cup Release Button
3. Carry Handle
4. System Check Indicator
5. Rinsable Filter Access
6. Dirt Cup
7. Filter made with HEPA media
8. Height Adjustment
9. Furniture Guard
10. Adjustable Dusting Brush
11. Wand
12. Crevice Tool (inside wand)
13. Cord Rewind Pedal
14. Brushroll ON/OFF Pedal
15. Handle Release Pedal
16. Hose
17. Turbo Tool
18. ON/OFF Switch
19. Hose Release Button
20. Hose Connecting Tube
On-OFF swITCH
2.2
A
CarPeT HeIGHT aDJusTMenT*
2.4
*Number of height settings vary per model.
Actual model may vary from images shown.
2. HOw TO use
2.1
2
3
4
5
6
7
8
9
2.2 Plug cord into electrical
outlet.
To turn vacuum ON (I=0N),
push ON/OFF switch (A) to
ON position.
To
turn
vacuum
OFF
(O=OFF), push switch to OFF
position.
C
1
10
11
12
13
14
COrD release
2.3
IMPOrTanT
When pulling on the cord, yellow tape will identify when
the cord is almost fully extended. When red tape is visible
on the cord, the cord has reached its full length. (Do not
pull the cord past the red tape.)
2.4 To adjust height setting, PUSH DOWN and TURN knob (C)
to desired height setting.
For maximum cleaning performance, the following carpet
height settings are recommended:
• Hard floor setting: for use on hard floors only.
• Low through High settings: Adjust depending on
carpet type.
• For high pile carpet, use high carpet setting to
ease pushing effort.
IMPOrTanT
If the vacuum is difficult to push, push down and turn
knob to the next higher setting.
6
15
2.3 Prior to using, grasp the
end of the plug and pull to
release the cord from the
cord reel until red tape is
reached.
16
17
18
19
20
Publicidad
Tabla de contenido
