BEROTEC CUMPAN Manual Del Usuario página 13

Menu 4 [LAYOUT]:
Submenu 4 [LAYOUT] - [gearing calibration]:
Menu 5 [SENS]:
» Damping: Sets the smoothing of the speed
» Sensor: Preset for „BIKE" (24 pulses) / „CAR" (60 pulses) or „UNI" (freely adjustable)
» Count („UNI" only): The number of pulses per crankshaft revolution can be freely selec-
ted and thus the RPM detection can be customized
DISPOSAL
Equipment that can no longer be used should not be disassembled as a whole unit, but
rather in individual parts and recycled according to the type of materials. Components
that cannot be recycled must be disposed of in an appropriate manner.
» Layout: Display layout selectable from 5 different
representations
» gearing calibration: Calling up the gear calibration
» Gear calibration:
→
Engaging the appropriate gear on the vehicle
with the engine running („Gear 1" = 1st gear etc.)
→
press „calibrate" , selected gear turns green -
value has been acquired
Values can be adjusted manually if required
English
13