Viking Range VDVE900 Manual De Instrucciones página 4

CONNECT 10" ROUND DUCTWORK
1. Connect 10" round ductwork to blower. Run ductwork
to downdraft location.
2. Refer to downdraft ventilator manual for
instructions on how to:
Locate and cut holes in cabinet.
Attach 10" round duct and rough-in plate to
downdraft.
NOTE: Use duct tape to make ductwork connections secure
and air tight.
VIKING RANGE, LLC GREENWOOD,
MISSISSIPPI 38930 USA
USE AND CARE
Disconnect electrical power supply and lock out
service panel before cleaning or servicing this unit.
CLEANING
Remove cover and carefully vacuum blower and in-
side of housing. Be careful not to bend or otherwise
damage blower wheel.
MOTOR LUBRICATION
The motor is permanently lubricated. Do not oil or
disassemble motor.
4
99045284B