How It Works; Changing The Unit Of Measurement - GolfBuddy aim L10 Guia Del Usuario

▶ HOW IT WORKS

1. Power On (Press the Power/
2. Select the targeting mode (By pressing the Mode Button)
3. Align the cross with the target
4. Press the Power/
▶ SLOPE ON/OFF
• Slope Switch: Toggle ON ⇄ OFF

▶ CHANGING THE UNIT OF MEASUREMENT

• To change the unit of measurement, hold down the MODE button for 3 seconds to
alternate from Meter to Yard and vice versa
▶ Slope Function
[Slope On]
Slope compensated distance is displayed on top screen Straight-line distance and height
(+/-) is shown in the bottom of the screen
[Slope
Straight-line distance is displayed on top screen and bottom lines disappear
measurement Button
measurement Button
)
to view the distance