Publicidad
THE ACTIVE AQUA ROOT SPA BUCKET SYSTEM
The Active Aqua Root Spa is a single plant Deep Water Culture system. This bucket system is simple and grows
efficiently. After a very short time you will realize the advantage of this unique, easy-to-use, inexpensive, and
forgiving system! The air pump oxegenates the nutrient solution, without the need of often troublesome air
stones.
WHAT'S IN THE BOX
1 - Bucket
1 - 8" Bucket Basket
1 - 1/2" Grommet
1 - 1/4" Tubing
1 - Multipurpose Air Hose assembly
1 - Air Pump
READ AND SAVE THESE INSTRUCTIONS
USING THE ROOT SPA BUCKET SYSTEM
1.
Insert plastic 1/2" elbow and multipurpose air hose into grommet opening.
2.
Position multipurpose air hose assembly vertically and place into hose retainer.
3.
Fill bucket with just enough water to reach the bottom of the net pot and check for leaks.
4.
Add the type and amount of nutrient to the water required for the type of plant to be grown.
5.
Attach one end of the 1/4" tubing to the air pump and insert the other end of the air hose to the top of the
multipurpose air hose assembly. The use of silicon lubricant (not included) may help during set up.
6.
Turn on pump and watch the water inside the Root Spa bubble up. As soon as bubbling is established, the
plant can be installed in the 8" bucket basket with your choice of growing media.
Insert elbow and
multipurpose air hose
SISTEMA DE CUBOS ROOT SPA DE ACTIVE AQUA
El sistema Root Spa de Active Aqua es un exclusivo sistema de cultivo en aguas profundas. Este sistema de cubos
es sencillo y fomenta el crecimiento de forma eficiente. En muy poco tiempo, percibirá las ventajas de este
sistema único, fácil de usar, económico y flexible. La bomba de aire suministra oxígeno a la solución de nutrientes,
sin la necesidad de utilizar las problemáticas piedras difusoras de aire.
CONTENIDO DE LA CAJA
1 - Cubo
1 - Cesta para el cubo de 20.32 cm (10 in)
1 - Arandela de 1,25 cm (1/2 in)
1 - Tubería de 0,6 cm (1/4 in)
1 - La unidad de la manguera de aire multifuncional
1 - Bomba de aire
LEA Y CONSERVE ESTAS INSTRUCCIONES
USO DEL SISTEMA DE CULTIVO EN CUBOS HIDROPÓNICOS ROOT SPA
1.
Introduzca el tubo acodado de 1,25 cm (1/2 in) de plástico y la manguera de aire multifuncional en el orificio
de la arandela.
2.
Coloque la unidad de la manguera de aire multifuncional verticalmente y acople el enganche de
manguera.
3.
Rellene el cubo con agua hasta alcanzar la parte inferior de la maceta de red y compruebe que no pierda
agua.
INSTRUCTIONS
Attach tubing to air pump
INSTRUCCIONES
www.Hydrofarm.com
Attach air hose to multipurpose
air hose assembly
la
Publicidad
