Philips SDV3427W/27 Manual Del Usuario página 16

c) Ground the 75 OHM Grounding Block: Connect
a #8 aluminum or #10 grounding wire to a screw
terminal provided on the 75 ohm grounding
block. Connect the other end of the wire to an
acceptable building ground location. Refer to
step a) in this section for acceptable building
grounding locations.
Be sure to double check all your connections
after your installation is complete. Ensure there
are good electrical connections of your ground-
ing wires and coax cables. See Fig. 7d below
for an example of a properly grounded antenna
installation.
Fig. 6d Ejemplo de conexión a tierra de la antena
conforme al Código Nacional Eléctrico (NEC)
Panel medidor
del servicio eléctrico
If you are unsure how to properly ground your
antenna installation, contact a professional
installer in your area.
d) Danger Label Application: If your antenna
mounting structure, such as a mast, J-Mount or
pole, does not have a danger label, apply the
label provided to the base of the mounting
structure in a clearly visible location.
16
Cable coaxial de la antena
Bloque de conexión a tierra de
75 ohm (Sección 810-20 del NEC)
Lazo de goteo de lluvia para el cable
coaxial al televisor
Conductores de conexión a tierra
(Sección 810-21 del NEC)
Abrazadera de conexión a tierra
Sistema de electrodos con conexión a tierra
del servicio eléctrico (Art. 250, Parte H del NEC)