Symbols; Description Of The Appliance And Accessories [Fig. A]; Assembly [Fig. B] - Imetec MAX POWER Instrucciones Para El Uso

EN
• The power cable must always be fully unwound to prevent hazardous
overheating.
On position
protection class II
prohibited

DESCRIPTION OF THE APPLIANCE AND ACCESSORIES [Fig. A]

refer to Figure [a] in the illustrative guide to verify your appliance equipment. all the figures
are on the cover pages of these instructions for use
1. Handle
2. ON/OFF switch
3. power cable with plug
4. suction inlet
5. Multi-surface Brush
6. Outlet grille
7. Outlet filter
8. dust collection system level indicator
9. appliance opening key
10. dust collection system
10a. dust container
10B. dust container cover
Before every assembly operation, always turn the appliance off and
remove the plug from the power socket!
• loosen the fastening screw (12) of the handle (1) and remove it.
• attach the handle to the body of the appliance, taking care to assemble it correctly [Fig.
B1].
• Insert the fastening screw (12) and tighten it clockwise [Fig. B2].
• Grip the MulTI-surFace brush (5) and connect the element to the intake connection
(4).
8

SYMBOLS

11. Technical data
12. Fastening screw
13. automatic cable winding
14. electronic power control

ASSEMBLY [Fig. B]

Off position
automatic cable winding
Warning
10c. cover release key
10d. Filter protection grille
10e. cyclone filter
10F. cyclone filter cover
10G. Fastening flap
13a. cable compartment
13B. cable winding key