Adjusting Picture; Adjusting Brightness; Adjusting Color Density; Adjusting Tint - Alpine PKG-RSE1 Manual De Operación

Adjusting Picture

Brightness, color, tint, contrast and sharpness can be
adjustable.
• Each source can be adjustable individually.
• Adjusting should be made within 10 seconds, otherwise
OSD (On Screen Display) will be automatically turned
off.
• When the adjustment is made, "FLAT" setting in Visual
EQ changes to "CUSTOM". After reset, "CUSTOM"
changes back to "FLAT"
1
Press and hold the SELECT button for at
least 2 seconds to open SETUP screen. Make
sure the PICTURE display mode is selected.
SELECT

Adjusting Brightness

2
▲ ▼
Press or and select BRIGHT.
3
Press or to adjust the brightness.
Brightness can be adjusted from –15 (MIN) to
+15 (MAX).
4
Press the ENT button to fi nish adjustments
or wait 10 seconds until OSD disappears; the
adjustment will be saved automatically.
6
-EN
TW_PKG-RSE.indb EN6 TW_PKG-RSE.indb EN6

Adjusting Color Density

2
Press
3
Press
Change depth can be adjusted from –15 (MIN)
to +15 (MAX).
4
Press ENT to fi nish adjustments or wait
10 seconds until OSD disappears; the
adjustment will be saved automatically.

Adjusting Tint

Front Panel Controls
2
Press
3
Press
be adjusted from G15 (G MAX) to R15 (R
MAX).
SELECT
Remote Control
4
Press ENT to fi nish adjustments or wait
10 seconds until OSD disappears; the
adjustment will be saved automatically.

Adjusting Contrast

2
Press
3
Press
can be adjusted from –15 (LOW) to +15
(HIGH).
4
Press ENT to fi nish adjustments or wait
10 seconds until OSD disappears; the
adjustment will be saved automatically.
▲ ▼
or and select COLOR.
or to adjust the color density.
▲ ▼
or and select TINT.
or to adjust the tint. Tint tone can
▲ ▼
or and select CONTRAST.
or to adjust the contrast. Contrast
4/25/05 4:50:56 PM 4/25/05 4:50:56 PM