Cleaning And Care - Klarstein 10032854 Manual Del Usuario

EN
20

CLEANING AND CARE

For hygienic reasons the appliance interior, including interior accessories, should be
cleaned regularly.
CAUTION
Risk of Injury! The appliance may not be connected to the mains during
cleaning. Danger of electrical shock! Before cleaning switch the
appliance off and remove the plug from the mains, or switch off or turn
out the circuit breaker or fuse. Never clean the appliance with a steam
cleaner. Moisture could accumulate in electrical components, danger
of electrical shock! Hot vapors can lead to the damage of plastic parts.
The appliance must be dry before it is placed back into service.
• Ethereal oils and organic solvents can attack plastic parts, e.g. lemon juice or the
juice formorange peel, butyric acid, cleanser that contain acetic acid. Do not allow
such substances to come into contact the appliance parts.
• Do not use any abrasive cleaners
• Switch the appliance off and remove the plug from the mains, or switch off or turn
out the circuit breaker of fuse.
• Clean the appliance and the interior accessories with a cloth and lukewarm water.
After cleaning wipe with fresh water and rub dry.
• Accumulation of dust at the condenser increases energy consumption. For this
reason carefully clean the condenser at the back of the appliance once a year with
a soft brush or a vacuum cleaner.
• After everything is dry place appliance back into service.
Defrosting
The evaporator, however, will become progressively covered with frost. This should
be removed. Never use sharp metal tools to scrape off frost from the evaporator as
you could damage it. However, when the ice becomes very thick on the evaporator,
complete defrosting should be carried out as fellows:
• Pull out the plug from the socket.
• Remove all stored food, wrap it in several layers of newspaper and put it in a cool
place.
• Keep the door open, and placing a basin underneath of the appliance to collect the
defrost water.
• When defrosting is completed, dry the interior thoroughly.
• Replace the plug in the power socket to run the appliance again.