Activating/Deactivating The Fn Key; Media Keys; Win-Key Lock - Cherry MX BOARD 6.0 Manual De Instrucciones

4 Adjusting the
backlighting
The backlighting of the keys can be adjusted in
100 increments or switched off. The status
LEDs integrated in the keys (NUM, SHIFT and
SCROLL) still light up at 100% brightness even
when the backlighting is switched off.
The symbols for adjusting the volume and the
microphone are secondary functions of F5 to
F9.
To make multiple adjustments: see

5 "Activating/deactivating the FN key".

• To adjust the backlighting, press the FN key
and the appropriate key as shown in the
table.
Example:
To switch the backlighting on or off, press the
FN key and F9 ( ).
The keyboard backlighting is switched on or off.
The keyboard saves the setting.
The keys have the following functions:
Key Function
Backlighting 1% dimmer
Backlighting 1% brighter
Key Function
Backlighting 10% dimmer
Backlighting
10% brighter
Backlighting on/off
(When you switch the
backlighting on again, the keys
are lit with the most recently set
brightness.)
5 Activating/deactivating
the FN key
To make major adjustments, you can lock the
FN key on. You then only have to press the
appropriate key for the adjustment you want to
make.
• To activate or deactivate the FN key, press it
at the same time as the CTRL key.
The FN key lights up blue (active) or red
(inactive).
Example:
To switch the backlighting on or off, press
F9 ( ) with the FN key activated.
The keyboard backlighting is switched on or off.
The keyboard saves the setting.

6 Media keys

The media keys above the numerical keypad
have the following functions:
Key Function
Previous title
Play/pause
Next title

7 Win-Key lock

You can deactivate Windows commands to
avoid entering them by mistake.
This affects the following keys and
combinations:
• Windows key
• ALT + F4
• ALT + TAB
• CTRL + ALT + DEL
• To enable or disable, press the CHERRY key
( ) above the numerical keypad.
When the Windows keys are disabled, they are
not lit.
The keyboard saves the setting.
GB
9