SANIC 3P Serie Instrucciones Para La Instalacion Y Mantenimiento

ANTIMICROBIAL TECHNOLOGY
INSTALLATION AND MAINTENANCE
Dear Customer,
Thank you for choosing one of the SANIC products manufactured by ATLAS FILTRI S.r.l.,
Italy. SANIC is the range of water filters with antimicrobial product protection.
The SANIC Water Filter you have purchased has been designed and manufactured in
Italy using the most advanced techniques.
Copyright: This manual of instructions cannot be reproduced, in whole or in part, in any form (including
its recording, digitalization or photocopying) without the written consent of ATLAS FILTRI S.r.l.
SANIC FILTERS COMPLY WITH THE FOLLOWING INTERNATIONALLY ACCEPTED
STANDARDS:
1 Safety Alert Symbols
2 General Information
3 Personnel's Qualification
4 Precautions, Warnings
5 Installation
6 Start Up
7 Use
8 Spare Parts
9 Cartridge Replacement
10 Maintenance
11 Troubleshooting
12 Filter and Cartridge Disposition
13 LIMITED WARRANTY
®
SANIC is a registered trademark of ATLAS FILTRI srl.
Manufacturer's identification:
ATLAS FILTRI s.r.l.
Headquarter: via Pierobon, 32 - Production site: via del Santo, 227
35010 LIMENA (PD) - ITALY
Tel. +39.049.769055 - Fax +39.049.769994 - www.atlasfiltri.com
WATER FILTERS WITH
INSTRUCTIONS FOR
CONFORMITY CERTIFICATES
- Filter models 3P and DP series with plastic threaded
connections conform to NSF/ANSI 42 for Bacteriostasis effect
as verified and substantiated by test data.
- Filter models 3P and DP series with plastic threaded
connections as components conform to NSF/ANSI 42 and 61
for material safety and structural integrity as verified and
substantiated by test data.
TABLE OF CONTENTS
USA & CANADA
2
2
2
2
3
4
4
4
6
6
7
7
7
1