Inglesina Zippy Manual De Instrucciones página 39

LIST OF COMPONENTS
Stroller
fig. 1
P1
P2
P3 String blocking plug
P4 Armrest cover
P5 Handrail
P6 Handrail covering
P7 Feeding bottle holding unit
P8 Backrest
P9 Hood
P10 Muff
P11 Storage basket
P12 Rain cover
ADDITIONAL TRANSPORT UNITS
Carrycot | Car Seat
fig. 2
C
C1
C2
S
ASSEMBLING THE REAR WHEELS
fig. 3 Press the push-button (P13) and hook the rear
wheels (P2) until hearing a CLICK signalling the occurred
hooking.
fig. 4 Insert the strap (P14) in the proper seat on the
frame.
fig. 5 Insert the string blocking plug (P3).
CAUTION: the correct assembly of the joined brake is im-
portant for the safe use of the frame.
fig. 6 In case of problems when mounting the plastic
plug (P3), it is possible to remove it as shown in figure; then,
repeat the procedure.
ASSEMBLING THE FRONT WHEEL ASSEMBLY
fig. 7
CLICK signalling the correct hooking.
CAUTION: make sure that the wheels are properly hoo-
ked before use.
fig. 8
spring (P15
FRAME OPENING
fig. 9 Keeping pressed the lever (P16) positioned on the
fig. 10
control (P17) till the horizontal blocking position.
fig. 11 Make sure that all closing mechanisms are pro-
perly attached on both sides before use.
FRAME CLOSING
fig. 12
handle (P19).
fig. 13
fig. 14 Make sure that the lever (P16) is attached to the
central articulated joint.
TRANSPORTATION HANDLE
fig. 15 To transport the closed frame, use the proper
handle (P20
(P19).
INSTRUCTIONS
HANDLE ADJUSTMENT (FOR MODELS, WHERE IT IS
FORESEEN)
fig. 16
terms of height and direction; to adjust the handle to the
wished position, act on the internal push-buttons (P21).
REAR WHEELS BRAKE
fig. 17
(P22) positioned on the rear wheels.
Always engage the brake during stops.
FRONT WHEELS BLOCKING/RELEASE
fig. 18
(P23) positioned on the front wheels.
REAR PLATFORM
fig. 19
the crossing of obstacles.
FEEDING BOTTLE HOLDING UNIT
fig. 20
STORAGE BASKET
fig. 21
basket (P11). To secure it, insert all buttonholes in the proper
hooks and button up the rear strips.
HOOKING OF ADDITIONAL TRANSPORT UNITS TO THE
FRAME (CARRYCOT AND CAR SEAT)
fig. 22
ZIPPY CARRYCOT
HOOKING OF THE CARRYCOT TO THE FRAME
follows:
fig. 23
P1) until hearing a pressing with the index finger the hooking lever (P24) posi-
tioned inside the armrest.
fig. 24
the armrests (P25
P1), press the CAUTION: make sure that the carrycot is always properly
attached on both sides of the frame before use.
UNHOOKING OF THE CARRYCOT FROM THE FRAME
fig. 25
fig. 26
handle.
HOOKING OF THE HOOD
fig. 27
fig. 28
P18), lift the using the suitable press studs.
HANDLE AND HOOD ADJUSTMENT
fig. 29
lateral button (C4
fig. 30
it by the handle.
HOOKING OF THE BLANKET
fig. 31
The frame is equipped with adjustable handles in
To engage the brake, push downwards the lever
The frame is equipped with pivoting wheels that
Act with the foot on the rear platform (P17) to ease
Hook the feeding bottle holding unit (P7) to the
The frame is equipped with a capacious storage
S) to the frame.
Remove the armrest covers (P4
Act on the lever (C3
Wrap the hood (C1) around the handle fastening it
To adjust the handle and the hood act on the two
CAUTION: to transport the carrycot, always hold
Hook all buttons of the blanket (C2
C) or the
39