Diagnostic Software - Stihl MDG 1 Manual De Instrucciones

Check the power cord and power supply
unit for damage before each use. Never
use damaged cords or connectors.
To reduce the risk of stumbling, position
and mark the power supply cord so that
it cannot be damaged or endanger
others.
Reduce the risk of electric shock:
Always connect the engine analyzer
–
to a properly installed wall outlet.
Insulation of connectors must be in
–
good condition.
After completing test with
engine analyzer, discon -
nect the power supply
unit.
Store the engine analyzer and power
supply unit out of the reach of children.
MDG 1

Diagnostic software

STIHL diagnostic software can be used
only with the MDG 1 and ADG 1
analyzers.
System Requirements
Install STIHL diagnostic software only
on a computer that meets the system
requirements. You must have
administrator rights to install the
software on a computer running
® ®
Microsoft Windows , contact your
system administrator if necessary.
Operating System
® ®
Microsoft Windows XP SP 3 or
–
®
Microsoft Windows Vista
–
® ®
Microsoft Windows 7
–
Software Requirements
®
Microsoft .NET 3.5 or higher
–
® ®
Adobe Acrobat Reader 9 or
–
higher
Hardware Requirements
Minimum requirements
CPU 1 GHz
–
256 MB free memory
–
minimum of 100 MB hard disk space
–
Resolution – SVGA monitor
–
(minimum resolution 1024 x 768)
USB interface 1.1 or higher
–
CD-ROM or DVD drive
–
Recommended configuration
CPU 2 GHz
–
512 MB free memory
–
minimum of 100 MB hard disk space
–
Resolution – SVGA monitor
–
(minimum resolution 1024 x 768)
USB interface 1.1 or higher
–
CD-ROM or DVD drive
–
®
or
English
17