Atlantic TidalWave PAF-20SV Manual De Operación página 2

Introduction
Thank you for selecting the Tidal Wave PAF-20SV/PAF-25SV/PAF-40SV/
PAF-75SV series pumps. Before using this pump please take a moment
to review this manual.
To avoid an accident do not use the pump in any way other than as
described in this manual. Please note the manufacturer cannot be
responsible for accidents arising because the product was not used
as prescribed. After reading this manual keep it as a reference in case
questions arise during use.
* The chart volumes shown are in gallons per hour. Operating pumps outside of the recommended range may cause
bearing damage and premature failure.
Prior to Operation and Installation
• When the pump is delivered, first perform the following checks:
• Check for any damage to pump and power cable that may have
occurred during the shipment.
• Check the model number to make sure it is the product that was
ordered and verify the voltage and frequency are correct.
Caution
• DO NOT operate this product under any condition other than those for
which it is specified. Failure to observe this precaution can lead to elec-
trical shock, electrical leakage, fire, water leakage or other problems.
• DO NOT apply any paint over the stainless steel motor body. Reduced
cooling ability will result in overheat, overload, introduce undesirable
performance reductions, periodic auto shut-off and pump malfunction.
2