WOXTER Scriba 195 Manual De Usuario página 18

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 1
EN
SETTINGS
1. Access to system setting mode.
Choose the mode of "settings" on main interface, and then press "ok"
key to access into the system setting list.
2. System setting list
There are seven options, including "Refresh model, power settings, Date
& Time, Language, Format Device, Default Settings and Device
information" options.
- Refresh model: this supports setting the refresh, and there are options
including refresh each page, 3page,5page,
- Power settings: including auto shutdown and standby settings.
- Date/time setting: You can set the Year, Month, Day and Hour, Minute,
Second by left and right key.
- Language setting function, there are language options of Simplified
Chinese, English and Russia etc.
- Formatting local disk
- Default settings: use this option to restore factory setting state
- Device information: display the software versioning, check the used
and unused capacity of the flash, If there is a Micro SD, you can check
the capacity of the TF card.
3 Explanation of the battery and power supply
- When the machine is in charging state, the top right will show the
charging icon , after fool charged, the icon will switch to full power icon
automatically.
- When the battery is run out, it shows , the system will prompt low
voltage. Please charge in time then.
- When you charge for the product for the first time, in order to
maximize the state of the battery, it is recommended to charge with
power off and keep for more than 8 hours.
- The new product should be full charged and full released for the first
three times to activate; after that, it takes about 3-3.5 hours to fully
charge the battery; it requires a longer charging time in running state.
17
woxter.es

Hide quick links:

Publicidad

Tabla de contenido
loading

Tabla de contenido