Panasonic TY-WK32LX20W Manual De Instalación página 5

Components
TY-WK32LX20W
Wall hanging bracket ..................... × 1
Requests regarding handling
1) Exercise care when selecting the location for the TV because it may discolor or deform due to light or heat if it is
placed where it is exposed to direct sunlight, or near a heater.
2) Upkeep
Wipe with a dry cloth. If the unit is extremely soiled, first wipe off soiling with a neutral detergent diluted in water,
and then wipe with a dry cloth. Do not use cleaners such as benzene, thinner or furniture wax because they may
cause paint peeling. (If using a chemical wiping cloth, follow any precautions included.)
3) Do not affix adhesive tape or stickers. Doing so may dirty the surface of the wall mounting bracket.
Precautions for wall hanging bracket fitting
The wall hanging bracket is for use in attaching a LCD TV unit to a vertical wall for viewing. Do not fit to any surface
other than a vertical wall.
There is a lock mechanism on the left side of the unit, so keep a space of at least 300 mm (11 13/16 inches)
between the LCD TV and the nearest wall.
To ensure correct LCD TV performance and prevent trouble, do not fit at any of the following locations.
• Near sprinklers or fire/smoke detectors
• Where there is a risk of exposure to vibration or impact
• Near high-voltage wires or dynamic power supplies
• Locations exposed to air blown from heating equipment
Fit using techniques suited to the structure and materials of the fitting location.
Use commercially available M6 screws suited to the wall surface material (wood, steel frame, concrete etc.) for
fitting the bracket to the wall.
Fit so there is no contact between the attachment screws or power cord and any metal inside the wall.
For the TV power supply plug, use a power supply outlet that can be reached easily.
Ensure good air flow so that the equipment ambient temperature does not exceed 40˚C. Failure to do this may
cause heat to build up inside the LCD TV, resulting in malfunction.
Wall hanging bracket (Vertical mounting type)
Cover stickers ........................... × 2
Insulation spacers ..................... × 4
Dished toothed washers ............ × 4
Allen wrench (included tool) ...... × 1
Unit fastening screws
( + M5-35) ................................. × 2
Allen head countersunk screws
(M4-18) ...................................... × 4
5