Intended Use; Pictured Components; Scope Of Delivery; Technical Data - Parkside PBH 1050 A1 Instrucciones De Utilización Y De Seguridad

Introduction
SDS-PLUS Hammer drill
PBH 1050 A1
Introduction
Congratulations on your new product. You have se-
lected a high quality product. The instructions for use
are a part of this product. They contain important
information about safety, use and disposal. Before
using the product, please familiarise yourself with
all the operating and safety instructions. Only use
the product as described and for the indicated pur-
pose. When passing this product on to others please
be sure to also include all of its documentation.

Intended use

The hammer drill and chisel hammer PBH 1050 A1
is suitable for:
- Hammer drilling bricks, concrete and stone
- Chiseling concrete, stone and plaster
- Drilling stone, wood and metal
Any other use or modifying the device is considered
improper use and involves considerable accident risks.
The manufacturer is not liable for damage caused
by improper use.
The device is not intended for commercial use.

Pictured components

Wing screw
1
Clockwise / counter-clockwise switch
2
ON / OFF switch
3
Speed setting
3a
ON / OFF switch locking button
4
Light emitting diode
5
Function selector switch
6
Release button for function selector switch
6a
Additional handgrip
7
Tool holder
8
Dust cover
9
Locking sleeve
10
Depth stop
11
34 GB/MT

Scope of delivery

1 SDS-PLUS Hammer drill PBH 1050 A1
1 Additional handgrip
1 Quick-release chuck with adapter (see Fig. A)
3 Drills (see Fig. B)
1 Flat chisel (see Fig. B)
1 Pointed chisel (see Fig. B)
1 Depth stop
1 Tin of lubricating grease
1 Carrying case
1 Set of operating instructions

Technical Data

Rated input power:
Rated voltage:
Idle speed:
Impact frequency:
Impact energy:
Drilling capacity:
Protection class:
Noise and vibration data:
Measured sound value determined according to
EN 60745. The A-rated noise levels of the electrical
power tool are typically at:
Hammer drilling:
Sound pressure level: 91.26 dB(A)
Sound power level:
Uncertainty K:
Chiselling:
Sound pressure level: 93.44 dB(A)
Sound power level:
Uncertainty K:
Wear hearing protection!
The total vibration (vector sum of three directions) is
calculated in accordance with EN 60745:
1050 W
230 V∼, 50 Hz
n 0–980 / min
0
0–5300 / min
3 joules
max. 13 mm in steel
max. 32 mm in wood
max. 26 mm in concrete
II /
102.26 dB(A)
3 dB
103.44 dB(A)
3 dB