Promaker PRO-H1400 User Manual página 18

• Disconnect the mains plug from the socket.
Only separate the high-pressure hose from the trigger gun or the
device when there is no pressure in the system.
TURN OFF TAP
• Pressure the lever of the trigger gun to release any remaining
pressure in the system.
• Release the lever of the trigger gun.
• Lock the lever of the trigger gun.
ATTENTION
• When disconnecting the supply or high pressure hose, warm
water may leak from the connection after operation.
• Detach the appliance from the water supply.
TRANSPORTATION
CAUTION
Risk of personal injury or damage!
Mind the weight of the appliance during transport.
When transporting by hand
• Switch the product off and disconnect it from the water and power
supply.
• Pull out the transport handle until it audibly snaps into place.
Attach transportation guards, if applicable.
• Pull the appliance by its transport handle.
When transporting in vehicles
• Prior to horizontal transport: close the cap of clean detergent
bottle.
• Tilt the product towards you until it balances on the wheels. Then
move it by its transportation handle.
• Protect the product from any heavy impact or strong vibrations
18