English
Owner´s manual
Fig. 7
4.6 Pull up the Starting Handle gently until
resistance is felt, then pull it up rapidly. Put
back the handle slowly to avoid damage to
the starting system. Turn the key-switch to
START position for E-start Models, (Figure 8)
4.7 If the engine fails to start, please
turn on the choke lever and repeat what
explained in Section 4.6.
Fig. 8
WARNING After the engine started,
release the starting handle gently to avoid
personal injury and/or equipment damage due
to the bouncing back.
4.8 Once the engine is started, set the
choke lever to ON position. (Fig. 9)
Fig. 9
25