English; General Description; Important - Philips Double Speed GC6107 Manual De Instrucciones

ENGLISH

6

General description

A Supply hose
B Temperature light
C Temperature dial and indicator
D Steam activator and lock
- D1. Lock
- D2. Activator
E Cap of steam tank
F Iron stand
G Steam tank
H Mains cord
I Steam-ready light (GC6107 only)
J Steam tank switch with power-on light
K Steam control (GC6107/GC6104 only)
L Iron switch with power-on light
M 'Steam tank empty' light (GC6107 only)
N Soleplate

Important

Read these instructions for use carefully before using the appliance and
save them for future reference.
Check if the voltage indicated on the type plate corresponds to
the local mains voltage before you connect the appliance.
Only connect the appliance to an earthed wall socket.
Do not use the appliance if the plug, the cord, the supply hose or
the appliance itself shows visible damage, or if the appliance has
been dropped or is leaking.
Check the cord and the supply hose regularly for possible
damage.
If the mains cord or the supply hose is damaged, it must be
replaced by Philips, a service centre authorised by Philips or
similarly qualified persons in order to avoid a hazard.
Never leave the appliance unattended when it is connected to the
mains.
Never immerse the iron or the steam tank in water.
Keep the appliance out of the reach of children.
Always place and use the iron and the steam tank on a stable,
level and horizontal surface. Do not put the steam tank on the
soft part of the ironing board.
Do not allow the mains cord and supply hose to come into
contact with the soleplate when it is hot.
The iron stand and the soleplate of the iron can become
extremely hot and may cause burns if touched. If you want to
move the steam tank, do not touch the stand.