ammoon Nano LOOPER Manual Del Propieratio página 4

3.After recording, step on the switch, enter
the playback state, light turns green.
Press
4.If you need to overlay the
recording, please repeat 2-3 steps.
6.In any state, a quick Step on the switch of
the pedals and long press two times , will
clear all data, lights flashing and then turns
off.
Flashing and then
turns off
Fast press two
times and press
long
7.In any state ,step on the switch of
the pedals and long press , will erase
the last recording.
Green
Fast press and
press long
Green
5.In any state, a quick step on the switch
of the pedal two times will stop working,
green light keep flashing.
Green light
keep flashing
Press two
times fast
if step down and long press again, you
can restore the deletion of the recording.
Green
Fast press and
press long
SD card instruction
Insert SD card into looper, unplug the
power again after recording, the
indicator will flash and enter the
export mode. After the flicker stops,
the export succeeds.
SD card interface