Beper VE.560 Manual De Instrucciones página 8

Enfriador usb portátil
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 19
Portable USB air cooler Use Instructions
Before cleaning, always unplug the appliance.
To protect against electric shock, do not immerse cord, plug or any
parts of the appliance into water or other fluids.
Do not hold the appliance with wet hands or feet.
Do not hold the appliance with naked feet.
Do not expose the appliance to atmospheric agents such as rain,
wind, snow, hail.
Do not use the appliance near explosives, highly flammable mate-
rials, gases, burning flames, heaters.
Do not allow children, disabled people or every people without expe-
rience or technical ability to use the appliance if they are not properly
watched over. Close supervision is necessary when any appliance
used by or near children.
Make sure that children do not play with this appliance.
If you decide not to use the appliance any longer, make it unservice-
able by simply cutting the supply cable after disconnecting the plug
from the socket.
ALSO MAKE ANY DANGEROUS PARTS UNSERVICE-
ABLE, ESPECIALLY FOR CHILDREN WHO COULD
PLAY WITH THE APPLIANCE.
Description of the item: Fig.A
1. Switch button
2. Rear grill
3. USB cable connector
4. Water tank
5. Light selection button
6. Speed selection button
7. Speed indicator
8. Front grill
9. USB cable
Some warnings:
• Place the product on a flat, stable and possibly raised from the floor, surface.
• After pouring the water into the tank wait at least 3 minutes before turning on the product, so that the evapora-
tive panel can absorb the water.
• The autonomy of the tank is about 8 hours at low speed, but even if the tank is empty because the evaporative
panel is still wet the product is able to cool again for a while.
• To ensure a longer life of the product and preserve its characteristics it is advisable to use distilled water.
• To cool more quickly, you can also place a few ice cubes in the tank.
• Do not move or shake the product when the tank is full.
• Take great care that foreign bodies are not inserted into the grids.
• Do not place objects on top of the product.
• Do not cover the product when it is operating.
• Do not obstruct the grilles during operation.
• Do not overturn the product.
• Do not immerse the product in water or other liquids.
• Do not place the product near sources of heat or inflammable objects.
8

Publicidad

Tabla de contenido
loading

Tabla de contenido