Maintenance - HOLZMANN MASCHINEN SHT350XXF Instrucciones De Servicio

18 CLEANING
Wrong cleaning agents can attack the varnish of the machine. Do not use solvents,
nitro thinners, or other cleaning agents that could damage the machine's paint.
Observe the information and instructions of the cleaning agent manufacturer!
Regular cleaning is a prerequisite for the safe operation of the machine and its long service life.
Therefore, remove dust and abrasion regularly with a soft, lint-free (cotton) cloth, otherwise the
hydraulic piston may wear prematurely.
19

MAINTENANCE

The following hazards may occur when working on the hydraulics:
 uncontrolled discharge of the hydraulic fluid
 accidental machine movements
 flying away or bursting parts
 skin diseases
Work on the hydraulics must therefore only be carried out by competent persons with
the appropriate specialist knowledge.
Danger of crushing! Unload the table before carrying out any maintenance work.
During servicing or maintenance work on the hydraulics, there is a risk that the table
will lower from the set position. Before carrying out any maintenance or repair work
in the raised position, support the table securely!
The hydraulic oil should be changed every twelve months. Only use HLP hydraulic oil
(ISO VG class 22 or higher) that meets the requirements of DIN 51425, Part 2.
Please note that in certain countries lifting tables must be inspected annually by an
expert. Check the applicable legal requirements in good time and, if necessary,
contact your local authority for further information regarding a necessary inspection.
The machine is low-maintenance and only a few parts have to be serviced. Nevertheless,
malfunctions or defects which could impair the safety of the user must be rectified immediately!
 Before each start-up, make sure that the machine is in perfect condition and functions
properly.
 Once a week check all connections for tightness.
 Regularly check whether the warning and safety labels on the machine are in perfect and
legible condition.
 Only use lubricants and original spare parts recommended by the manufacturer.
HOLZMANN MASCHINEN GmbH
NOTICE
WARNING
WARNING
NOTICE
NOTICE
Hydraulic oils are toxic and must not be released into the environment.
When changing, use suitable collecting containers with sufficient volume!
Observe the disposal instructions of the oil manufacturer. If necessary,
contact your local authority for further information on proper disposal.
NOTICE
www.holzmann-maschinen.at
CLEANING
SHT150XF | SHT300XF | SHT350XXF
24