CAUTION: Do not at any time let brake fluids, gasoline,
petroleum based products, penetrating oils, etc., come in
contact with plastic parts. They contain chemicals that can
damage, weaken or destroy plastic.
Make sure the battery is detached from the unit, then use
only mild soap and a damp cloth to clean the tool. Never let
any liquid get inside the tool; never immerse any part of the
tool into a liquid.
Fertilizers and other garden chemicals contain agents which
greatly accelerate the corrosion of metals Do not store the
tool on or adjacent to fertilizers or chemicals.
Problem
Possible Couse
-Unit does not Run
-Battery not making contact
-Trigger switch not operational
-Battery not installed properly
-Battery not charged
-Line won't feed
-Line tangled in spool
-Line fails to cut off
-Line cutter in guard is damaged or missing
-Battery will not charge
-Battery not inserted into charger
-Charger not plugged in
-Surrounding air temperature too hot or too cold -Move charger and tool to a surrounding air temperature of about 39
For parts or service, please call 1-800-313-5111 or visit us online at www.americanlawnmower.com. Be
sure to provide all relevant information when you call or visit.
REPAIR PARTS (KITS/ ITEMS)
The model number of this tool is found on a plate or label attached to the housing. Please record the serial
number in the space provided below.
MODEL NUMBER
SERIAL NUMBER_______________
Always mention the model number when ordering kits/items for this tool.
No.
Kit/Item Number
1
LST20-AHK-1
2
LST20-PGK-1
3
RS90121
MAINTENANCE
TROUBLESHOOTING
LST02010_____
Description
Auxiliary Handle Kit
Protection Guard
Spool Kit
Call us first with questions about operating or maintaining your string trimmer
at 1.800.313.5111 between 8:00 a.m. – 5:00 p.m. Eastern Standard Time,
or or get assistance on www.americanlawnmower.com.
IMPORTANT: To assure product SAFETY and RELIABILITY,
repairs, maintenance and adjustment should be performed by
a qualified individual using only identical replacement parts.
If you drop the trimmer, carefully inspect it for damage. If the
guard is bent or cracked, handles broken or if you see any
other condition that may affect the trimmer's operation, it must
be repaired before putting it back into use. Call our customer
service help line at 1-800-313-5111 for assistance.
Possible Solution
-Check battery is fully inserted
-Check that lock off button is fully depressed prior to moving trigger
-Check battery installation
-Check battery charging requirements
-Unwrap 24" of line and re-wind
-Replace guard
-Insert battery into charger until red LED appears
-Plug charger into a working outlet
-Check current at receptacle by plugging in a lamp or other appliance
-Check to see if receptacle is connected to a light switch which turns
power off when you turn out the lights
degree F (4 degree C) or below 104 degree F (+40 degree c)
No.
Kit/Item Number
4
BL82120
5
CHL82000
CALL US FIRST !!
7
Model LST02010
Description
Battery Pack
Charger