COFFEE SYSTEM OPERATION
Cappuccino
Remove water spout (if installed).
1
Adjust the froth regulator on the milk container to the
2
desired amount. Refer to the chart and illustration below.
Fill with milk and insert the milk container. Refer to the
3
illustration below.
Place a cup under the coffee spout, then verify the milk
4
spout is positioned over the cup.
Press
to initiate the cycle.
5
Once the cycle is complete, place a cup under the milk
6
spout, then press and hold CLEAN on the milk container
until the bar is complete.
Remove milk container and place in refrigerator.
7
FROTH
BEVERAGE
Caffelatte
Latte Macchiato
Cappuccino
FROTH
REGULATOR
Froth regulator.
|
12
Wolf Customer Care 800.222.7820
AMOUNT
No Froth
Some Froth
Most Froth
RECEPTACLE
CLEAN
BUTTON
Milk container.
ADJUSTING VOLUME
Refer to the chart below for the programmed volume of milk
and coffee for cappuccino. The maximum volume of milk is
limited to the volume in the container.
Insert the milk container.
1
Press
until 'MILK FOR CAPPUCCINO PROGRAM
2
QUANTITY' is displayed, then release.
Once the desired volume of milk is dispensed, press
3
After a few seconds unit will begin to dispense coffee
4
and 'COFFEE FOR CAPPUCCINO PROGRAM QUAN-
TITY' appears on the display.
Once the desired volume of coffee is dispensed,
5
press
. The new volume will be maintained until repro-
grammed or default settings are selected.
VOLUME
BEVERAGE
Cappuccino
MILK
COFFEE
2.4 oz
2.7 oz
(70 ml)
(80 ml)
.