Publicidad
Idiomas disponibles
Idiomas disponibles
1. Slide a Caster Wheel with Lock (#13) into Caster Beam
as shown in FIGURE 1. On the other end of the Caster
Beam attach a Caster Wheel without Lock (#9). Make
sure you have one Caster Wheel with lock and a Caster
Wheel without lock for each Caster Beam.
Repeat this step to attach the Casters to the second
Caster Beam.
Parts Needed:
2 pcs - #8 Caster Beam
2 pcs - #9 Caster without lock
2 pcs - #13 Caster with lock
without lock
2. Attach Cross Tube (#7) to Caster Beam Assemblies using four Phillips Rd. Hd. Bolts (#26) as shown
in FIGURE 2.
Part Needed:
1 pc - #7 Cross Tube
Hardware Needed:
4 pcs - #26 Phillips Rd. Hd. Bolt
8
with lock
Rubber Hammer
9
13
READ AND FOLLOW ALL ASSEMBLY, OPERATING,
AND SAFETY INSTRUCTIONS CAREFULLY. AT LEAST
TWO (2) ADULTS ARE NEEDED TO PUT THIS TABLE
TOGETHER!
13
9
with
lock
26
4
without lock
Figure 1
8
NOTE:
Make sure the Caster
Stem is completely installed
into Caster Beam as shown.
13
Figure 2
Publicidad
