Battery Replacement - Honeywell LUTRON LR-HWLV-HVAC TouchPRO Wireless Manual De Funcionamiento

Ocultar thumbs Ver también para LUTRON LR-HWLV-HVAC TouchPRO Wireless:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Operating Manual

Battery Replacement

Battery Replacement
TouchPRO Wireless Features
The TouchPRO Wireless® thermostat has
a coin cell battery that retains the time
and date during a power failure. Under
normal circumstances the coin cell should
last five years. Should the time and date
need to be reset after a power failure, this
is an indication that the coin cell needs
to be replaced. You should replace the
battery every five years, or before leaving
home for an extended period.
The TouchPRO Wireless® thermostat
is shipped from the factory with the coin cell installed. To keep the battery from discharging
during shipment and storage, the TouchPRO Wireless® thermostat is shipped from the factory
with a plastic tab inserted in the battery holder. This tab must be removed before the thermostat
is mounted on the wall. Simply pull the plastic tab out of the thermostat. To replace the battery,
remove the battery tray using a screw driver. Place a new coin cell (type CR2032 or equivalent)
observing the correct polarity and push the battery tray into the battery cover assembly.
P/N 041-339 Rev. C
Coin cell
battery tray
12
69-2656EFS—05

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Lutron touchpro wireless lr-hwlv-hvac

Tabla de contenido