Machine Description; Recommended Use - Battipav MASTER LINDA 0905S Manual De Instrucciones

GB
• Damaged safety devices or other parts should be properly repaired or replaced by an authorised Service Centre unless
otherwise indicated elsewhere in this instruction manual.
• Have defective switches replaced by an authorised Service Centre.
• Do not use tool if its switch cannot be turned on or off.
Warning
• For your personal safety use only accessories recommended in this instruction manual or in the relevant catalogues The use
of any other accessory or attachment other than those recommended in this instruction manual or in the relevant catalogue
may present a risk of personal injury.
Have tools repaired by qualified personnel
• This electric appliance is in accordance with the safety rules in force. Only qualified experts may carry out repairing of electric
appliances otherwise it may cause considerable danger for the user.
*
1
The noise emitted by this machine was measured on production samples in compliance with ISO 3745-77 standards.
The machine is run on a surface made up of 4 ceramic blocks measuring 430x430 mm, and a PPN brush of the type supplied, is used.
*
2
The machine in working conditions has a noise emission higher than 85 dB (A).

MACHINE DESCRIPTION

The LINDA-MASTERLINDA single-brush machines are technologically advanced, high performance machines used in the building
industry for cleaning, surfacing, sleeking and washing floors. It exploits the action performed by the rotation on the surfaces of
tools with a diameter of 420-500 mm. The operator is situated in the rear of the machine foot to the scope of the handle control
and to the actuation lever. From this position holds the handle with his hands, chooses the speed of rotation and pressing the
levers causes rotation of the tool of the machine.

RECOMMENDED USE

SERIES TOOL: CLEANING BRUSH
RECOMMENDED USE: all types of floors
Admissible working conditions: CONTINUOS
MANUFACTURER AND MACHINE
The nameplate shown is fitted directly on the machine. It indicates all the references and information necessary for safe operation.
24
A Machine model
B Item
C Serial number
D Power supply voltage
E Power supply frequency
F Current absorption
G Installed power rating
H Tool rotation speed
I Class of protection
L Starter capacitor
INSTALLATION
TRANSPORT / HANDLING
MODEL LINDA 090-090S
• Stand the handle upright.
18
• Assemble the control handle by turning the knobs on the handle extension.
19
Coil the power supply cable onto the cable brackets. When the machine does not have any brushes fitted, be very careful not
to damage the quick-coupling hub.
MODEL MASTERLINDA 0960
• Stand the handle upright.
1
• Fold up the handle using the wrenches provided of the handle joint.
REMOVE THE SIDE BALLAST BEFORE TRANSPORTING THE MACHINE
2 Coil the cable onto the cable brackets.
With the aid of a second person, move the machine.
MODEL MASTERLINDA WITH TANK 0960S
3
Remove the tank from the handle using the split pin.
Perform the operations indicated for model 0960.
HANDLING
By using the transport wheels, the machine can be moved in the yard.
• Coil the cable onto the cable brackets.
22
M IP Level
N Year of manufacture
O Max tool diameter
P Internal tool diameter
Q Accessories
R Accessories
S Manufacturer's name
T Manufacturer's name and address
U Certification Marks
Battipav srl