Ariston 3318884 Instrucciones De Instalacion Y Uso página 40

GB
Installation
- connect the pair of wires to the con-
nector (fi g. 1);
- open up the holes required for fi xing;
- f ix the base of the device to the box
on the wall using the screws supplied
in the kit (fi g. 2);
- position the system interface on the
base, pushing it gently downwards
(fi g. 3).
NOTE: To avoid interference problems
when connecting the room sensor and
boiler, use a shielded cable or twisted
pair cable.
The following software versions of
Ariston Sensys are not compatible
with Ariston Net:
- 01.00.00
- 01.00.04
In this case, please replace the old
Sensys with the one provided with
Ariston Net.
40 /
BUS
B T
fi g. 1
fi g. 2
fi g. 3
B T