Wiring Diagram - Grouw 18023 Manual De Instrucciones

WIRING DIAGRAM

LOG SPLITTER OPERATION
MAKE SURE THAT THE SKREWS ARE
TIGHTENED UP PROPERLY BEFORE
OPERATING THE LOG SPLITTER!
THE BLEED SKREW SHOULD BE
LOOSENED BY SOME ROTATIONS
BEFORE OPERATING THE MACHINE!
PLUMBING DIAGRAM
This log splitter is equipped with "ZHB"
control system that requires to be operated
by both hands of the user – Left hand
controls the hydraulic control lever while
right hand controls the pushbutton switch.
The log splitter will freeze upon absence of
either hand. Only after both hands release
the controls, the log pusher starts to return
backward to the starting position.
Trigger type lock-out device is adopted to
avoid accidental Hydraulic Control Lever
pushdown. To operate the Hydraulic Control
Lever, draw the Trigger backward with the
index � nger before push the Hydraulic
Control Lever forward.
Never force the log splitter for
more than 5 seconds by keeping
pressure on it to split excessively
hard wood.
After this time interval, the oil under pressure
will be overheated and the machine could
be damaged. For such extremely hard log,
rotate it by 90° to see whether it can be
GB
79